Gypsum Powder Machinery Price

Grinding system

The Plaster raw materials in the storage bin are fed into the grinding machine through a vibrating feeder for precision processing. An electromagnetic vibration feeder is installed under the storage bin, which is interlocked with the mill to adjust the supply of materials in real-time based on the operation of the mill. The material is uniformly and continuously fed into the mill through an electromagnetic vibration feeder for grinding. 

The Plaster uncooked powder after grinding is blown out by means of the airflow from the mill blower and labeled by way of the evaluation computer above the foremost machine. The powder with the specific fineness enters the massive cyclone collector with the airflow, and is gathered and discharged via the powder discharge pipe to shape the completed product. The completed product falls into the screw conveyor and is transported to the subsequent device for calcination. The airflow flows into the blower thru the return air duct of the massive cyclone collector. The complete air duct machine is closed loop and flows below terrible pressure. Due to the presence of water in the floor uncooked cloth and its evaporation into gasoline throughout the grinding process, the air quantity in the circulating air course increases. This accelerated air extent is delivered into the bag filter thru the pipeline between the cyclone collector and the blower to get rid of dirt from the air and discharge it into the surroundings to make sure cleanliness. The cloth passing thru the grinding device has been modified from a particle dimension of 0-30mm to 80-120 mesh, which meets the fineness necessities of Plaster powder.