Gypsum Powder Machinery Price with Capacity 15Million m2

Grinding system
The Plaster uncooked substances in the storage bin are fed into the grinding laptop via a vibrating feeder for precision processing. An electromagnetic vibration feeder is established underneath the storage bin, which is interlocked with the mill to alter the furnish of substances in real-time based totally on the operation of the mill. The fabric is uniformly and continually fed into the mill via an electromagnetic vibration feeder for grinding.

The Plaster raw powder after grinding is blown out via ability of the airflow from the mill blower and labeled with the aid of way of the contrast pc above the main machine. The powder with the particular fineness enters the huge cyclone collector with the airflow, and is gathered and discharged by the powder discharge pipe to structure the performed product. The finished product falls into the screw conveyor and is transported to the subsequent machine for calcination. The airflow flows into the blower through the return air duct of the huge cyclone collector. The entire air duct computer is closed loop and flows under horrible pressure. Due to the presence of water in the ground raw material and its evaporation into gas at some stage in the grinding process, the air extent in the circulating air direction increases. This accelerated air extent is delivered into the bag filter through the pipeline between the cyclone collector and the blower to get rid of filth from the air and discharge it into the environment to make certain cleanliness. The material passing through the grinding system has been modified from a particle dimension of 0-30mm to 80-120 mesh, which meets the fineness requirements of Plaster powder.