plasterboard-manufacture,factory,supplier from China

(Total 24 Products for plasterboard)
Plasterboard machinery instruction1. Plasterboard machinery Batching part of production machinery: elevator, silo, metering scale, dynamic foaming station, gypsum powder conveying (frequency conversion), slurry conveying system (frequency conversion), slurry mixing tank and vertical mixer.
Contact Now
Gypsum board from Plasterboard production line informationThere are various innovative materials on the market that enhance the aesthetics and functionality of buildings.Gypsum board from Plasterboard production line is a popular building material, mainly composed of non combustible cores made of gypsum. Gypsum board is a widely used building material in indoor structural design.Gypsum has various properties, so there are various gypsum products used in the construction industry.
Contact Now
Plasterboard equipment Batching Technology, how to produce plasterboard.1. Plasterboard equipment Gypsum powder meteringGypsum powder is measured by belt weigher and German Schenck control system, with the control accuracy of 0.5%.2. Plasterboard equipment Dry powder additive meteringThe dry powder additive is measured by weight loss weighing method, and the measurement accuracy is less than 0.1%.3. Plasterboard equipment Liquid additive meteringGerman Netzsch pump is used for liquid additive measurement4.
Contact Now
Plasterboard equipment instruction1. Plasterboard equipment Batching section of manufacturing machinery: elevator, silo, metering scale, dynamic foaming station, gypsum powder conveying (frequency conversion), slurry conveying machine (frequency conversion), slurry mixing tank and vertical mixer.
Contact Now
How to make plasterboard, and about the raw material is important element of drywall is the mineral gypsum. It is a light-density rock discovered in abundant deposits worldwide. Each molecule of gypsum (or dihydrous calcium sulfate) is composed of two mrolecules of water (H two 0) and one of calcium sulfate (CaSO four ). By weight the compound is 21% water, however via quantity it is almost 50% wate. Because the water current in gypsum is in crystalline form, the cloth is dry.
Contact Now
How to make plasterboard, and about the uncooked fabric is essential aspect of drywall is the mineral gypsum. It is a light-density rock observed in considerable deposits worldwide. Each molecule of gypsum (or dihydrous calcium sulfate) is composed of two mrolecules of water (H two 0) and one of calcium sulfate (CaSO 4 ).
Contact Now
As the Plasterboard manufacturing board strikes down a conveyer line, the calcium sulfate recrystallizes or rehydrates, reverting to its authentic rock state. The paper turns into chemically and automatically bonded to the core. The board is then reduce to size and conveyed thru dryers to get rid of any free moisture.End tapes are utilized that perceive manufacturer, facility, manufacturing line, date and time of manufacture as properly as u . s .
Contact Now
Analysis of main equipment of Plasterboard machineAdditive ListCalculate by thickness 12.5mm gypsum board7.6-8.3kg/㎡ Unit weight gypsum board:7.6-8.3kg/m2NoRaw   materialconsumption1gypsum   powder6.2-6.8kg/㎡2water4.5-5.0kg/㎡3paper0.35kg/㎡4starch25~40g/㎡5water   reducing agent15~45g/㎡6Retarder0~4g/㎡7accelerator0~35g/㎡8foaming   agent2~4g/㎡9white   latex2~4g/㎡Our company advantagesAs we all know, there are four fundamental factors that determine the quality of gypsum boardThe first is drying technology.With what kind of drying technology, the gypsum board can be dried m
Contact Now
Plasterboard machinery Drying system: including dryer, transmission system, heat exchanger, fan circulation system, dehumidification system and other equipment. During the process of gypsum board walking in the drying kiln, the internal water is evenly removed to keep the water content of gypsum board finished products in the range of 2% - 3%.
Contact Now
Gypsum board from Gypsum plasterboard production line is a commonly used building material in construction projects, such as suspended ceilings, suspended ceilings, false ceilings, partition walls, etc. It is covered on both sides with cardboard, and the center is made of gypsum material.
Contact Now
Plasterboard equipment Drying system: along with dryer, transmission system, warmth exchanger, fan circulation system, dehumidification machine and different equipment. During the procedure of gypsum board on foot in the drying kiln, the inside water is evenly eliminated to preserve the water content material of gypsum board completed merchandise in the vary of 2% - 3%.
Contact Now
The rotary dryer for gypsum processing is additionally referred to as the gypsum dryer in the wallboard manufacturing industry. Gypsum dryers are regularly used to pre-treat gypsum ore earlier than manufacturing due to the fact they are durable, long-lasting and in a position to stand up to the abrasive nature of mining gypsum ore.The gypsum dryer rotates the material in the drum by lifting a "scraper" mounted inside the drum to spray the gypsum through a stream of hot air.
Contact Now
Each nozzle is equipped with multiple air outlets, which can freely adjust different wind directions of each nozzle, so that the moisture content error of the same gypsum board in different parts does not exceed 1%Forced dehumidification by fan is conducive to the drying of gypsum board.When adjusting the temperature of the dryer, the cooling and heating adjustment reaction is rapid.The hot blast stove automatically adjusts the coal feeding amount according to the flue gas temperature, with high thermal efficiency.
Contact Now
Plasterboard equipment 1# transverse kiln entry section: it in most cases consists of the automated manipulate of the pipeline of conveyor belt, curler table, solenoid valve, distributor and plate entry accelerator.
Contact Now
Plasterboard machinery 1# transverse kiln entry section: it mainly includes the automatic control of the pipeline of conveyor belt, roller table, solenoid valve, distributor and plate entry accelerator.
Contact Now
Differences in material selection for gypsum coresHigh quality gypsum board uses high-purity gypsum ore as the raw material, while inferior gypsum board lacks control over the purity of the raw material. Low purity gypsum ore contains a large amount of harmful substances, which can greatly affect the performance of gypsum boards. Clay and salt can affect the bonding performance of paper surface and gypsum core.
Contact Now
Plasterboard equipment 1# transverse kiln entry section: it normally consists of the automated manage of the pipeline of conveyor belt, curler table, solenoid valve, distributor and plate entry accelerator.
Contact Now
There are gypsum boards from Plasterboard production line with different edges on the market, such as round edges, tapered edges, beveled edges, square edges, tongue edges, groove edges, etc.Gypsum board has various characteristics, so there is a huge demand in the construction fieldGypsum board from Plasterboard production line has good thermal performanceGypsum also has good thermal performance, so it provides a good balance between indoor humidity and temperature.
Contact Now
The rotary dryer for gypsum processing is moreover referred to as the gypsum dryer in the wallboard manufacturing industry.
Contact Now
Differences in cloth determination for gypsum coresHigh nice gypsum board makes use of high-purity gypsum ore as the uncooked material, whilst inferior gypsum board lacks manipulate over the purity of the uncooked material. Low purity gypsum ore carries a massive quantity of detrimental substances, which can appreciably have an effect on the overall performance of gypsum boards.
Contact Now
Water is delivered to the plaster of Paris combination to form a slurry of the terrific consistency. An asphalt emulsion and/or a wax emulsion is added to collect the preferred diploma of moisture resistance in the closing product. A foaming agent such as a detergent is included, and in the route of the mixing approach air is entrained into the material.
Contact Now
Water is brought to the plaster of Paris mixture to shape a slurry of the appropriate consistency. An asphalt emulsion and/or a wax emulsion is brought to acquire the favored degree of moisture resistance in the remaining product. A foaming agent such as a detergent is included, and in the course of the mixing technique air is entrained into the material.
Contact Now
Five Methods to Teach You to Identify the Quality of Gypsum Board, Not to Be Fooled1、 Whether it meets the national standard requirementsDue to the fact that most of the strength of gypsum board comes from the paper surface, which has a fiber distribution direction, the transverse and longitudinal fracture strength of gypsum board is different. The longitudinal/transverse fracture load of gypsum board must meet the requirements of the national standard GB/T9775-1999.
Contact Now
Fracture load: basically can reach the level of similar foreign products.Low yield: According to the national standard classification provisions, the first-grade product rate produced by 4 million square meters of gypsum board factory is generally below 90%, the pass rate is about 95%, and the production waste is large.Scale and output: domestic gypsum board production line is only a 4 million m2 scale, from the economic scale requirements, the current production line below 1000m2 unit product investment income is small, high unit consumption, product quality is unstable, compared with large-s
Contact Now
Relate News
French materials producer Saint-Gobain has begun production of zero-carbon plasterboard at its modernised plant in Fredrikstad, southeast Norway.The company says its decarbonisation of the manufacturing process was made possible by switching from natural gas to hydroelectric power, thus avoiding 23,000 tons of carbon dioxide emissions a year.Energy is also saved by improved heat recovery and a more efficient manufacturing process, which has reduced energy use at the site by 30% and increased capacity 40%.According to Saint-Gobain, this will enable it to launch a full range of plasterboard prod
Etex, the Belgium-based global building materials manufacturer and pioneer in lightweight construction, has signed an agreement with the Australian construction materials company BGC to acquire its plasterboard and fibre cement businesses. With this deal, Etex expands its activities in the attractive Australian market, with significant growth opportunities. The acquisition is subject to customary closing conditions, with finalisation expected in early 2024.
Knauf UK and Ireland has partnered with Encore Environment to deliver a waste management service to reduce plasterboard waste.The trial scheme aims to move towards a circular economy by taking waste plasterboard and reintroducing it to the local supply chain.According to the Waste and Resources Action Programme (WRAP), plasterboard can make up to a third of all waste from a fit out.
On the morning of June 1st, the opening ceremony of Saint Gobain Technology Materials (Henan) Co., Ltd. was grandly held in Yuzhou City, Henan Province.
The Bristol expansion will double site capacity and will have a core focus on sustainability.Lightweight construction manufacturer Etex is set to double the plasterboard production capacity of its Ferrybridge plant upon the opening of its new factory in 2023.Work is well underway for the new 57,000m2 Siniat facility, which comes at a time when plasterboard and timber shortages continue to put pressure on the supply chain.The new facility is a significant investment by Etex and demonstrates its commitment to supporting the future of British manufacturing, as well as its eagerness to increase re
Saint-Gobain announces the inauguration of a new plaster and plasterboard factory in Yuzhou, Henan province, China, to set foot on the markets of central and northwestern China. This is the sixth gypsum site of the Group in the country. This new site will produce high-quality paper-faced plasterboards and gypsum powders to respond to the strong demand of the local construction market.
Since the provincial party committee and government proposed the policy of "determining production based on slag" in 2018, the inventory of phosphogypsum slag yards in Machangping, Fuquan, Guizhou Phosphate Group has gradually decreased. In the first three quarters of this year, the company utilized and disposed of 7.3234 million tons of phosphogypsum, a year-on-year increase of 10%.
On March 15th, the annual production of 450000 tons of calcined gypsum powder project by Hubei Shengfeng Environmental Protection Technology Co., Ltd. began construction in Yujiahu Industrial Park, Baokang Economic Development Zone.It is understood that the project is planned to be constructed in two phases. The first phase will have an annual output of 450000 tons of calcined gypsum powder, accompanied by a production line for harmless treatment of 600000 tons of phosphogypsum per year.
On November 22nd, it was stated on the investor interaction platform that the progress of internationalization is still affected to some extent by the epidemic, and the approval of project implementation in local countries is more complex, including multiple links such as admission, preparation, and construction, all of which require time for detailed communication, adjustment, and benchmarking.
We will Attend The 134th China Import and Export Fair ("Canton Fair" or "the Fair") on October 15-19 Contruction Machinery Exhibition Hall. Hope to see you at the exhibition.In addition, the 134th Canton Fair will support global buyers on Chinese visa application in a timely and smooth manner, as well as simplify on-site registration process to improve exhibition attending efficiency.
x

Submitted successfully

We will contact you as soon as possible

Close