Plasterboard Manufacturer-manufacture,factory,supplier from China

(Total 24 Products for Plasterboard Manufacturer)
As the Plasterboard manufacturing board strikes down a conveyer line, the calcium sulfate recrystallizes or rehydrates, reverting to its authentic rock state. The paper turns into chemically and automatically bonded to the core. The board is then reduce to size and conveyed thru dryers to get rid of any free moisture.End tapes are utilized that perceive manufacturer, facility, manufacturing line, date and time of manufacture as properly as u . s .
Contact Now
The rotary dryer for gypsum processing is additionally referred to as the gypsum dryer in the wallboard manufacturing industry. Gypsum dryers are regularly used to pre-treat gypsum ore earlier than manufacturing due to the fact they are durable, long-lasting and in a position to stand up to the abrasive nature of mining gypsum ore.The gypsum dryer rotates the material in the drum by lifting a "scraper" mounted inside the drum to spray the gypsum through a stream of hot air.
Contact Now
The rotary dryer for gypsum processing is moreover referred to as the gypsum dryer in the wallboard manufacturing industry.
Contact Now
Plasterboard equipment Cutting part: together with constant size slicing machine, acceleration curler desk and conveyor belt. This phase of the tools ordinarily completes the constant size slicing of gypsum board. The reducing size vary is 2400-6000mm. The slicing desktop adopts servo cutting, and the carrier lifestyles and slicing accuracy are radically improved.
Contact Now
Plasterboard machinery instruction1. Plasterboard machinery Batching part of production machinery: elevator, silo, metering scale, dynamic foaming station, gypsum powder conveying (frequency conversion), slurry conveying system (frequency conversion), slurry mixing tank and vertical mixer.
Contact Now
Plasterboard equipment Cutting part: which includes constant size slicing machine, acceleration curler desk and conveyor belt. This section of the gear frequently completes the constant size reducing of gypsum board. The reducing size vary is 2400-6000mm. The slicing desktop adopts servo cutting, and the provider existence and reducing accuracy are extensively improved.
Contact Now
Strong equipment processing capacityOur company has high-precision processing equipment (CNC blanking, cutting, planing, automatic welding, shot blasting and other equipment), which can independently control the processing accuracy and quality of the equipment.Our company has advanced testing equipment and perfect quality control means.
Contact Now
Gypsum board from Plasterboard production line informationThere are various innovative materials on the market that enhance the aesthetics and functionality of buildings.Gypsum board from Plasterboard production line is a popular building material, mainly composed of non combustible cores made of gypsum. Gypsum board is a widely used building material in indoor structural design.Gypsum has various properties, so there are various gypsum products used in the construction industry.
Contact Now
Plasterboard equipment instruction1. Plasterboard equipment Batching section of manufacturing machinery: elevator, silo, metering scale, dynamic foaming station, gypsum powder conveying (frequency conversion), slurry conveying machine (frequency conversion), slurry mixing tank and vertical mixer.
Contact Now
Plasterboard equipment Batching Technology, how to produce plasterboard.1. Plasterboard equipment Gypsum powder meteringGypsum powder is measured by belt weigher and German Schenck control system, with the control accuracy of 0.5%.2. Plasterboard equipment Dry powder additive meteringThe dry powder additive is measured by weight loss weighing method, and the measurement accuracy is less than 0.1%.3. Plasterboard equipment Liquid additive meteringGerman Netzsch pump is used for liquid additive measurement4.
Contact Now
How to make plasterboard, and about the raw material is important element of drywall is the mineral gypsum. It is a light-density rock discovered in abundant deposits worldwide. Each molecule of gypsum (or dihydrous calcium sulfate) is composed of two mrolecules of water (H two 0) and one of calcium sulfate (CaSO four ). By weight the compound is 21% water, however via quantity it is almost 50% wate. Because the water current in gypsum is in crystalline form, the cloth is dry.
Contact Now
Plasterboard machinery Cutting part: including fixed length cutting machine, acceleration roller table and conveyor belt. This part of the equipment mainly completes the fixed length cutting of gypsum board. The cutting length range is 2400-6000mm. The cutting machine adopts servo cutting, and the service life and cutting accuracy are greatly improved.
Contact Now
How to make plasterboard, and about the uncooked fabric is essential aspect of drywall is the mineral gypsum. It is a light-density rock observed in considerable deposits worldwide. Each molecule of gypsum (or dihydrous calcium sulfate) is composed of two mrolecules of water (H two 0) and one of calcium sulfate (CaSO 4 ).
Contact Now
Strong gear processing capacityOur employer has high-precision processing gear (CNC blanking, cutting, planing, automated welding, shot blasting and different equipment), which can independently manage the processing accuracy and exceptional of the equipment.Our enterprise has superior trying out tools and ideal fine manipulate means.
Contact Now
Plasterboard machinery Drying system: including dryer, transmission system, heat exchanger, fan circulation system, dehumidification system and other equipment. During the process of gypsum board walking in the drying kiln, the internal water is evenly removed to keep the water content of gypsum board finished products in the range of 2% - 3%.
Contact Now
Analysis of main equipment of Plasterboard machineAdditive ListCalculate by thickness 12.5mm gypsum board7.6-8.3kg/㎡ Unit weight gypsum board:7.6-8.3kg/m2NoRaw   materialconsumption1gypsum   powder6.2-6.8kg/㎡2water4.5-5.0kg/㎡3paper0.35kg/㎡4starch25~40g/㎡5water   reducing agent15~45g/㎡6Retarder0~4g/㎡7accelerator0~35g/㎡8foaming   agent2~4g/㎡9white   latex2~4g/㎡Our company advantagesAs we all know, there are four fundamental factors that determine the quality of gypsum boardThe first is drying technology.With what kind of drying technology, the gypsum board can be dried m
Contact Now
Gypsum board from Gypsum plasterboard production line is a commonly used building material in construction projects, such as suspended ceilings, suspended ceilings, false ceilings, partition walls, etc. It is covered on both sides with cardboard, and the center is made of gypsum material.
Contact Now
Plasterboard equipment Drying system: along with dryer, transmission system, warmth exchanger, fan circulation system, dehumidification machine and different equipment. During the procedure of gypsum board on foot in the drying kiln, the inside water is evenly eliminated to preserve the water content material of gypsum board completed merchandise in the vary of 2% - 3%.
Contact Now
Plasterboard equipment 1# transverse kiln entry section: it normally consists of the automated manage of the pipeline of conveyor belt, curler table, solenoid valve, distributor and plate entry accelerator.
Contact Now
Water is delivered to the plaster of Paris combination to form a slurry of the terrific consistency. An asphalt emulsion and/or a wax emulsion is added to collect the preferred diploma of moisture resistance in the closing product. A foaming agent such as a detergent is included, and in the route of the mixing approach air is entrained into the material.
Contact Now
Plasterboard equipment 1# transverse kiln entry section: it in most cases consists of the automated manipulate of the pipeline of conveyor belt, curler table, solenoid valve, distributor and plate entry accelerator.
Contact Now
There are gypsum boards from Plasterboard production line with different edges on the market, such as round edges, tapered edges, beveled edges, square edges, tongue edges, groove edges, etc.Gypsum board has various characteristics, so there is a huge demand in the construction fieldGypsum board from Plasterboard production line has good thermal performanceGypsum also has good thermal performance, so it provides a good balance between indoor humidity and temperature.
Contact Now
Each nozzle is equipped with multiple air outlets, which can freely adjust different wind directions of each nozzle, so that the moisture content error of the same gypsum board in different parts does not exceed 1%Forced dehumidification by fan is conducive to the drying of gypsum board.When adjusting the temperature of the dryer, the cooling and heating adjustment reaction is rapid.The hot blast stove automatically adjusts the coal feeding amount according to the flue gas temperature, with high thermal efficiency.
Contact Now
Plasterboard machinery 1# transverse kiln entry section: it mainly includes the automatic control of the pipeline of conveyor belt, roller table, solenoid valve, distributor and plate entry accelerator.
Contact Now
Relate News
 Canadian building materials manufacturer is set to restore and reopen a gypsum quarry in Cape Breton.Canadian Gypsum Company Inc.
Saint-Gobain, a French building products manufacturer, announced plans this week to invest $235 million across the next two years in the expansion and modernization of its CertainTeed gypsum manufacturing facility in Palatka, Florida.Per a company statement, the primary objective of the investment is to increase the production capacity of the existing plant while concurrently improving its energy consumption. The expansion of the facility will also involve the installation of energy-saving equipment and automation technology.
French materials producer Saint-Gobain has begun production of zero-carbon plasterboard at its modernised plant in Fredrikstad, southeast Norway.The company says its decarbonisation of the manufacturing process was made possible by switching from natural gas to hydroelectric power, thus avoiding 23,000 tons of carbon dioxide emissions a year.Energy is also saved by improved heat recovery and a more efficient manufacturing process, which has reduced energy use at the site by 30% and increased capacity 40%.According to Saint-Gobain, this will enable it to launch a full range of plasterboard prod
Etex, the Belgium-based global building materials manufacturer and pioneer in lightweight construction, has signed an agreement with the Australian construction materials company BGC to acquire its plasterboard and fibre cement businesses. With this deal, Etex expands its activities in the attractive Australian market, with significant growth opportunities. The acquisition is subject to customary closing conditions, with finalisation expected in early 2024.
The Bristol expansion will double site capacity and will have a core focus on sustainability.Lightweight construction manufacturer Etex is set to double the plasterboard production capacity of its Ferrybridge plant upon the opening of its new factory in 2023.Work is well underway for the new 57,000m2 Siniat facility, which comes at a time when plasterboard and timber shortages continue to put pressure on the supply chain.The new facility is a significant investment by Etex and demonstrates its commitment to supporting the future of British manufacturing, as well as its eagerness to increase re
On the morning of June 1st, the opening ceremony of Saint Gobain Technology Materials (Henan) Co., Ltd. was grandly held in Yuzhou City, Henan Province.
Knauf UK and Ireland has partnered with Encore Environment to deliver a waste management service to reduce plasterboard waste.The trial scheme aims to move towards a circular economy by taking waste plasterboard and reintroducing it to the local supply chain.According to the Waste and Resources Action Programme (WRAP), plasterboard can make up to a third of all waste from a fit out.
Saint-Gobain announces the inauguration of a new plaster and plasterboard factory in Yuzhou, Henan province, China, to set foot on the markets of central and northwestern China. This is the sixth gypsum site of the Group in the country. This new site will produce high-quality paper-faced plasterboards and gypsum powders to respond to the strong demand of the local construction market.
Georgia-Pacific held a ribbon cutting recently for their  new $325 million gypsum wallboard production expansion facility.The event was invitation only and included remarks by Georgia-Pacific president of the gypsum business, David Neal, Georgia-Pacific executive vice president of building products, Andy Konieczka and Nolan County Judge Whitley MayDECA Students from Sweetwater High School were also invited to attend the Georgia -Pacific ribbon cutting event.  DECA prepares emerging leaders and entrepreneurs for careers in marketing finance, hospitality and management in hig
The 2021 China Industrial Byproduct Gypsum Scale Application Exchange Conference and Exhibition, with the theme of "Improving Quality and Efficiency, Green Leading", was held in Chengdu, Sichuan.This summit forum is hosted by the Gypsum Building Materials Branch of the China Building Materials Federation.
x

Submitted successfully

We will contact you as soon as possible

Close