Plaster Machine-manufacture,factory,supplier from China

(Total 24 Products for Plaster Machine)
Some of the equipment commonly used in Automatic plaster machine include crushers, grinders, calciners and packaging machines. The production capacity of the Automatic plaster machine may vary depending on the size of the facility and the market demand for Plaster powder.Use of PlasterPlaster is a widely used industrial and construction material. Plaster (caso 4·2H2O) can be calcined and ground to obtain β-type semi-aqueous Plaster (2 caso 4·H2O), that is, architectural Plaster, also known as plaster ofParis or plaster.
Contact Now
Some of the gear many times used in Automatic plaster computing device consist of crushers, grinders, calciners and packaging machines. The manufacturing capability of the Automatic plaster laptop may also differ relying on the dimension of the facility and the market demand for Plaster powder.Use of PlasterPlaster is a extensively used industrial and development material.
Contact Now
Application of Plaster mill for Plaster Powder ManufacturingPlaster mill is suitable for grinding limestone, dolomite, kaolin, talc, mica, bentonite and different low hardness materials.
Contact Now
Process and tools selectionAccording to the procedure requirements, the building plaster tools is generally divided into 5 parts, particularly the crushing system, grinding system, calcination system, storage and transportation system, and electrical manage system.Material transportation:The overwhelmed plaster uncooked fabric is transported by way of a hoist to a storage bin for backup.
Contact Now
1. Jaw crusherThe feed particle dimension of the jaw crusher is ≤ 1200mm, the discharge particle dimension is 10-350mm, and the manufacturing ability can attain 1-1000t/h. Suitable for coarse crushing of giant blocks of Plaster, with robust crushing potential and excessive crushing ratio.2. Impact crusherThe feed particle measurement of the influence crusher is ≤ 1300mm, with a manufacturing ability of 30-2000t/h.
Contact Now
Automatic wall plaster machine TechnologyAutomatic wall plaster machine Capacity List                Capacity/TTon/hourRaw   gypsum rock consumption T/yearBoiling   furnace size30,0004.236,0004.5M×1.2M×1.4M50,0006.960,0004.5M×1.4M×1.6M60,0008.372,0004.5M×1.6M×1.8M80,00011.1196,0004.5M×1.8M×2.0M100,00013.88120,0004.5 M×2.0 M×2.2 M150,00020.83180,0004.5 M×2.2 M×2.4 M200,00027.77240,0004.5 M×2.4 M×2.6 MProduct relevant parameter (GB9776-88《constructional gypsum》which comes from the Gypsum Powder Manufacturing Machine.1.
Contact Now
1. Jaw crusherThe feed particle dimension of the jaw crusher is ≤ 1200mm, the discharge particle dimension is 10-350mm, and the manufacturing potential can attain 1-1000t/h. Suitable for coarse crushing of giant blocks of Plaster, with robust crushing potential and excessive crushing ratio.2. Impact crusherThe feed particle dimension of the have an effect on crusher is ≤ 1300mm, with a manufacturing potential of 30-2000t/h.
Contact Now
Plaster powder is one of the five gel materials and plays an important role in the national economy. Plaster powder production line is the natural dihydrate Plaster ore (raw Plaster) or industrial by-product Plaster (desulfurized Plaster, phosphoPlaster, etc.) calcined at a certain temperature. It is crushed to dehydrate and decompose the dihydrate Plaster.
Contact Now
Detailed rationalization of Plaster grinding method flowStep 1: Large stones flip into small stonesThe giant Plaster uncooked substances want to be first overwhelmed by means of a jaw crusher till they can attain the feed fineness of the grinding machine.Step 2: Turn small stones into stone powderPlaster that meets the necessities for grinding fineness is despatched to the Plaster particle silo through a raise machine, and then continually and evenly
Contact Now
Detailed clarification of Plaster grinding system flowStep 1: Large stones flip into small stonesThe giant Plaster uncooked substances want to be first overwhelmed with the aid of a jaw crusher till they can attain the feed fineness of the grinding machine.Step 2: Turn small stones into stone powderPlaster that meets the necessities for grinding fineness is despatched to the Plaster particle silo by using a carry machine, and then always and evenly fe
Contact Now
Crushing, grinding, calcination - Plaster Machinery process flowPlaster powder is one of the five major gel materials, which is processed through crushing, grinding and other processes. It is widely used in construction, building materials, industrial molds and art models, chemical industry and agriculture, food processing, medicine and beauty and other applications. It is an important industrial raw material.Plaster has good sound insulation, thermal insulation, and fire resistance characteristics. In China, natural Plaster reserves are abundant and have been used for a long time.
Contact Now
Plaster and plastering is also widely used in plaster products, such as plaster boards, plaster blocks, etc.The plaster board shape shown in the following figure:Plaster board mainly includes paper faced plaster board, plaster hollow strip board, plaster decorative board, fiber plaster board, etc;Plaster board is a lightweight board made mainly from hemihydrate plaster powder. It has properties such as lightweight, thermal insulation, non combustible, sound-absorbing, and can be sawn and nailed.
Contact Now
Working principle of Wall Plaster MachineAfter the bulk material is broken, it is sent to the silo by the lift, and then evenly sent to the main grinding chamber by the electromagnetic vibration feeder. Material entering the grinding chamber is scooped up and placed between the grinding roller and the ring to be ground. After grinding, the fan blows air into the grinding chamber, and the powder is blown into the analyzer for sorting.
Contact Now
The process of plaster equipment can be summarized as follows: plaster ore → vibrating feeder → jaw crusher → bucket elevator → raw material warehouse → grinding machine → bucket elevator → fluidized bed furnace → bucket elevator → conveyor → clinker warehouse cooling, storage → finished product. The grinding process is particularly crucial.
Contact Now
Application of Plaster mill for Plaster Powder ManufacturingPlaster mill is suitable for grinding limestone, dolomite, kaolin, talc, mica, bentonite and other low hardness materials.
Contact Now
The completed product place can be divided into: dry plate series section, emergency selecting gadget 1, horizontal switch of dry plates, dry plate lamination machine, pushing and reducing and trimming machine, emergency choosing device 2, aspect wrapping machine, storage machine, computerized padding mechanism, and stacking computing device in accordance to the procedure of dry plate transportation.
Contact Now
Wall Plaster Machine Process flowThe powder determination laptop sends the Plaster uncooked powder that has reached the required fineness after grinding to the fluidized mattress furnace for calcination, and the relaxation is back to the mill for in addition grinding till it is qualified.
Contact Now
In order to attain the above requirement, our enterprise have researched and developed a complete set of boiling furnace processing technology, the major fabric is good-quality steel. For example, warmth conductive oil pipe adopts seamless metal pipe (GB3087-82).
Contact Now
Process: Introduction to Wall Plastering Machine Process1: The crusher crushes large-sized Plaster ore into small particles smaller than 25mm, which are saved and transported into a mill for grinding. The powder choice desktop then sends the Plaster uncooked powder that reaches the required fineness of the product to a fluidized mattress furnace for calcination, and the relaxation is again to the mill for similarly grinding till it is qualified.
Contact Now
Calcination stageAfter the grinding is completed, the Plaster powder that meets the grinding standards is sent by the powder selection machine to the rotary kiln for calcination treatment. The cooked Plaster is sent to the storage bin for storage by the elevator, and materials that do not meet the requirements are further sent back to the grinding machine for grinding;Rotary kilnRotary kiln refers to a rotary calcination kiln, which is an equipment used in cement factories to calcine high-grade cement.
Contact Now
Process and equipment selectionAccording to the process requirements, the construction plaster equipment is usually divided into five parts, namely the crushing system, grinding system, calcination system, storage and transportation system, and electrical control system. Material transportation:The crushed plaster raw material is transported by a hoist to a storage bin for backup. The storage bin is designed according to the requirements for material storage time to ensure a stable supply of materials.
Contact Now
Technical parameters of plaster board1. Paper loading part: the upper and lower paper are equipped with automatic paper receiving machine, RE automatic deviation correction device and sizing device. The lower paper is equipped with scoring device, and a 1.5m gap is reserved between the automatic deviation correction device and the scoring machine to facilitate the installation of QR code roller printer. The upper and lower paper system is equipped with free paper guide rollers as required. (aluminum roller, dynamic balance G2.5, surace oxidation treatment, hardness HV300, runout 0.1mm)2.
Contact Now
Technical indicators of plaster powder products1. Product quality: Meet or exceed the requirements of the national "Building Plaster" standard (GB9776-2008).2. Fineness: 80-200 mesh, with a residue of 10%.3. Bending strength (directly related to raw materials): ≥ 1.6Mpa; Compressive strength: ≥ 3.0Mpa.4. Main phase composition: Content of hemihydrate plaster: ≥ 80% adjustableContent of plaster dihydrate:<5% adjustableSoluble anhydrous plaster content:<5% adjustable5. Initial setting time: 3-8 minutes adjustable; Final setting time: 6-15 minutes adjustable.6.
Contact Now
Wall Plaster Machine Process flowThe powder selection machine sends the Plaster raw powder that has reached the required fineness after grinding to the fluidized bed furnace for calcination, and the rest is returned to the mill for further grinding until it is qualified.
Contact Now
Relate News
On the morning of June 1st, the opening ceremony of Saint Gobain Technology Materials (Henan) Co., Ltd. was grandly held in Yuzhou City, Henan Province.
Saint-Gobain announces the inauguration of a new plaster and plasterboard factory in Yuzhou, Henan province, China, to set foot on the markets of central and northwestern China. This is the sixth gypsum site of the Group in the country. This new site will produce high-quality paper-faced plasterboards and gypsum powders to respond to the strong demand of the local construction market.
With the increasing improvement of people's quality of life and under the guidance of the "dual carbon" goal, building decoration materials are undergoing a transformation and upgrading transformation.
Since the provincial party committee and government proposed the policy of "determining production based on slag" in 2018, the inventory of phosphogypsum slag yards in Machangping, Fuquan, Guizhou Phosphate Group has gradually decreased. In the first three quarters of this year, the company utilized and disposed of 7.3234 million tons of phosphogypsum, a year-on-year increase of 10%.
On March 15th, the annual production of 450000 tons of calcined gypsum powder project by Hubei Shengfeng Environmental Protection Technology Co., Ltd. began construction in Yujiahu Industrial Park, Baokang Economic Development Zone.It is understood that the project is planned to be constructed in two phases. The first phase will have an annual output of 450000 tons of calcined gypsum powder, accompanied by a production line for harmless treatment of 600000 tons of phosphogypsum per year.
Oman’s Ministry of Transport, Communications and Information Technology (MTCIT) has announced the launch of a competitive tender for the award of a contract for the construction and operation of a pier dedicated to the handling of minerals at Manji in Dhofar Governorate.The project will enable the large-scale commercial development of the prodigious reserves of gypsum and other industrial minerals found in the pier’s hinterland, a sprawling area encompassing the Wilayat of Shaleem and Al Halaniyat Islands in the southeast of the Sultanate of Oman.Interested local and international companies wi
With China entering a new era of green and innovation-led growth, Saint-Gobain SA, the French industrial group, plans to put the second phase of its Yangzhou manufacturing base into operation in 2024 to further meet the soaring market demand for construction materials in China's eastern region.Ludovic Weber, Saint-Gobain's CEO for Asia-Pacific, said the equipment installation is planned to begin in the second half of this year.After the completion and commissioning of this project, the French company will further enhance its production capacity of high-quality paper-faced gypsum board
Saint-Gobain, a French building products manufacturer, announced plans this week to invest $235 million across the next two years in the expansion and modernization of its CertainTeed gypsum manufacturing facility in Palatka, Florida.Per a company statement, the primary objective of the investment is to increase the production capacity of the existing plant while concurrently improving its energy consumption. The expansion of the facility will also involve the installation of energy-saving equipment and automation technology.
Our company undertaken the project for 15 million m2 gypsum board production line in Tanzania and completed the 72 hour production acceptance.On the path of firmly promoting global layout, BNBM focuses on epidemic prevention and control while also focusing on business development. The production and sales of the North New Base in Tanzania are thriving. Despite the severe pandemic and a two-month shutdown, it has achieved full production and full sales, with a gross profit margin of 27%.
Gypsum Depot & More, the first hardware store specializing in the sale of gypsum board products and equipment for all types of construction, renovation, and remodeling projects, opened its first of three stores in Bayamón.With an investment of $1.4 million and the creation of 15 direct jobs, the new 8,100 square-foot store, which is coupled with a 10,000 square-foot warehouse, was designed by a company that works with megastores in the United States.“For this project, we selected a group of experts who helped us design a hardware store with the goal of making it easier for customers to get
x

Submitted successfully

We will contact you as soon as possible

Close