Gypsum Powder Making Machine Price-manufacture,factory,supplier from China

 Drywall making machine CapacityAnnual capacity/M2Day capacity(sheet)1200×2400×9mmDrier layerControl system2Million23004PLC4Million46006PLC6Million69008 DCS 10Million115001020Million2300012Gypsum ore is extracted from quarries or mines and then broken into smaller, more manageable sizes. The water content of the material is then assessed before entering the grinder. Gypsum ores with water content greater than 0.5% (by weight) are treated with rotary dryers.

Wall Plaster Machine Process flowThe powder determination laptop sends the Plaster uncooked powder that has reached the required fineness after grinding to the fluidized mattress furnace for calcination, and the relaxation is back to the mill for in addition grinding till it is qualified.

Wall Plaster Machine Process flowThe powder selection machine sends the Plaster raw powder that has reached the required fineness after grinding to the fluidized bed furnace for calcination, and the rest is returned to the mill for further grinding until it is qualified.

During the crushing stage of the Plaster powder manufacturing process, the measurement and specs of the extracted Plaster ore vary. According to the real situation, appropriate crushing gear is chosen for preliminary crushing treatment, and particles with a particle measurement of no extra than 35mm are crushed. 1.

The process of plaster equipment can be summarized as follows: plaster ore → vibrating feeder → jaw crusher → bucket elevator → raw material warehouse → grinding machine → bucket elevator → fluidized bed furnace → bucket elevator → conveyor → clinker warehouse cooling, storage → finished product. The grinding process is particularly crucial.

Gypsum board manufacturing line Decoration and veneer sectionAfter making use of adhesive and pressing, the paper gypsum board is flipped over and then utilized with adhesive and pressed for curing. After that, it is cut, bound, and saved in boxes.Main Performance of Gypsum Board(1) Low manufacturing electricity consumption.

Based on over 20 years of lookup and improvement journey in plaster making equipment, Liming Heavy Industry Technology has developed a patented technological know-how for the manufacturing of excessive yield and excessive power plaster powder. This science is a dry manufacturing technique that achieves self grinding and self selection.

During the crushing stage of the Plaster powder production process, the size and specifications of the extracted Plaster ore vary. According to the actual situation, suitable crushing equipment is selected for preliminary crushing treatment, and particles with a particle size of no more than 35mm are crushed. 1. Jaw crusher: The feed particle size of the jaw crusher is ≤ 1200mm, the discharge particle size is 10350mm, and the production capacity can reach 11000t/h.

Five Methods to Teach You to Identify the Quality of Gypsum Board, Not to Be Fooled1、 Whether it meets the national standard requirementsDue to the fact that most of the strength of gypsum board comes from the paper surface, which has a fiber distribution direction, the transverse and longitudinal fracture strength of gypsum board is different. The longitudinal/transverse fracture load of gypsum board must meet the requirements of the national standard GB/T9775-1999.

Process: Introduction to Wall Plastering Machine Process1: The crusher crushes large-sized Plaster ore into small particles smaller than 25mm, which are saved and transported into a mill for grinding. The powder choice desktop then sends the Plaster uncooked powder that reaches the required fineness of the product to a fluidized mattress furnace for calcination, and the relaxation is again to the mill for similarly grinding till it is qualified.

How is the gypsum powder produced? The crusher breaks the large-size gypsum ore into small portions of 25 mm, and then sends the small portions to the grinder. After grinding, the certified gypsum powder is despatched to the boiling furnace for calcination, and the unqualified phase is despatched to the grinder till qualified.

The process of plaster equipment can be summarized as follows: plaster ore → vibrating feeder → jaw crusher → bucket elevator → raw material warehouse → grinding machine → bucket elevator → fluidized bed furnace → bucket elevator → conveyor → clinker warehouse cooling, storage → finished product. The grinding process is particularly crucial.

Grinding systemThe Plaster raw materials in the storage bin are fed into the grinding machine through a vibrating feeder for precision processing. An electromagnetic vibration feeder is installed under the storage bin, which is interlocked with the mill to adjust the supply of materials in real-time based on the operation of the mill.

Proportioning and molding section: it mainly includes gypsum powder metering scale, auxiliary powder scale, two variable frequency slurry pumps, automatic control of conveying knife and slurry mixer, molding station mixer, platform vibration motor and other equipment, which can realize the proportional addition of gypsum powder, auxiliary powder and slurry, and complete the automatic proportioning of the whole system, which can not only save personnel, but also accurately proportioningCentral control section: the main equipment includes solidification belt forming machine, conveying roller mac

During the crushing stage of the Plaster powder manufacturing process, the measurement and specs of the extracted Plaster ore vary. According to the authentic situation, appropriate crushing gear is chosen for preliminary crushing treatment, and particles with a particle measurement of no extra than 35mm are crushed. 1.

Based on over 20 years of research and development experience in plaster making equipment, Liming Heavy Industry Technology has developed a patented technology for the production of high yield and high energy plaster powder. This technology is a dry production method that achieves self grinding and self selection. Through a frequency conversion high-speed powder separator, plaster can be directly ground to meet the GB/T9776-2008 standard for building plaster, without the need for external screening or sorting.

Process: Introduction to Wall Plastering Machine Process 1: The crusher crushes large-sized Plaster ore into small particles smaller than 25mm, which are stored and transported into a mill for grinding. The powder selection machine then sends the Plaster raw powder that reaches the required fineness of the product to a fluidized bed furnace for calcination, and the rest is returned to the mill for further grinding until it is qualified. The qualified Plaster powder after calcination is sent to the clinker warehouse for storage or to the product workshop for use. 2.

Detailed rationalization of Plaster grinding method flowStep 1: Large stones flip into small stonesThe giant Plaster uncooked substances want to be first overwhelmed by means of a jaw crusher till they can attain the feed fineness of the grinding machine.Step 2: Turn small stones into stone powderPlaster that meets the necessities for grinding fineness is despatched to the Plaster particle silo through a raise machine, and then continually and evenly

Jaw crusher: additionally known as jaw crusher, referred to as damaged jaw. Mainly accountable for the difficult crushing processing of gypsum. The working precept of extrusion crushing is adopted. The crushing chamber is deep and there is no lifeless zone, which improves the feeding potential and output, and the hourly manufacturing capability can attain 2200 tons.

How is the gypsum powder produced? The crusher breaks the large-size gypsum ore into small pieces of 25 mm, and then sends the small pieces to the grinder. After grinding, the qualified gypsum powder is sent to the boiling furnace for calcination, and the unqualified part is sent to the grinder until qualified. After calcination, the qualified gypsum powder is sent to the screw conveyor through the elevator.The screw conveyor sends the calcined gypsum powder to the silo for storage, and in the process, the gypsum powder is cooled.

Jaw crusher: additionally referred to as jaw crusher, referred to as damaged jaw. Mainly accountable for the tough crushing processing of gypsum. The working precept of extrusion crushing is adopted. The crushing chamber is deep and there is no lifeless zone, which improves the feeding potential and output, and the hourly manufacturing capability can attain 2200 tons.

Process: Introduction to Wall Plastering Machine Process1: The crusher crushes large-sized Plaster ore into small particles smaller than 25mm, which are saved and transported into a mill for grinding. The powder decision laptop then sends the Plaster uncooked powder that reaches the required fineness of the product to a fluidized mattress furnace for calcination, and the relaxation is lower back to the mill for similarly grinding till it is qualified.

Product name: Paper Faced Gypsum BoardProduct performance: The paper confronted gypsum board has robust factors such as mild quality, fireproofing, warmth preservation, sound insulation, humidification absorbing, easiness for set up and construction, and so on.

Introduction of the gypsum block machine1. Gypsum Powder Measuring SystemIt can measure the gypsum powder, it can transfer accurate gypsum powder intro Mixer or blender. The precision is ±0.5%.2. Water Measuring systemThe water measuring system is stainless. The precision is ±0.5%.3. Blender or Raw Material MixerIt is made of stainless steel, with washing device on machine cover to wash the adhered slurry on hopper in time and to ensure equipments to be clean. Its mixing device uses flash mixer to make slurry be quickly and evenly mixed in mixer.There are two blenders.