Gypsum Line Board-manufacture,factory,supplier from China

There are gypsum boards from Plasterboard production line with different edges on the market, such as round edges, tapered edges, beveled edges, square edges, tongue edges, groove edges, etc.Gypsum board has various characteristics, so there is a huge demand in the construction fieldGypsum board from Plasterboard production line has good thermal performanceGypsum also has good thermal performance, so it provides a good balance between indoor humidity and temperature.

Gypsum board from Plasterboard production line informationThere are various innovative materials on the market that enhance the aesthetics and functionality of buildings.Gypsum board from Plasterboard production line is a popular building material, mainly composed of non combustible cores made of gypsum. Gypsum board is a widely used building material in indoor structural design.Gypsum has various properties, so there are various gypsum products used in the construction industry.

The forming place normally includes: solidification belt, solidification belt cleansing device, belt deviation corrector, tapered belt, paper feeding wheel, bonding water, forming stress plate, forming presser foot, spray water, etc. The fashioned gypsum board is step by step solidified on the solidification belt to meet the necessities of slitting. Both precise and awful molding of gypsum board is achieved here.

The forming area mainly includes: solidification belt, solidification belt cleaning device, belt deviation corrector, tapered belt, paper feeding wheel, bonding water, forming pressure plate, forming presser foot, spray water, etc. The formed gypsum board is gradually solidified on the solidification belt to meet the requirements of slitting. Both good and bad molding of gypsum board is done here.

Gypsum that has been overwhelmed and heated to solid off 75% of its water content material cloth is stated as plaster of Paris. When water is delivered to this great white powder, the ensuing material is barring situation molded into any liked shape. Upon drying, the reconstituted gypsum regains its rock-like traits even as retaining the appreciated shape.

Gypsum board from Gypsum plasterboard production line is a commonly used building material in construction projects, such as suspended ceilings, suspended ceilings, false ceilings, partition walls, etc. It is covered on both sides with cardboard, and the center is made of gypsum material.

Gypsum board manufacturing line Drying sectionThe paper gypsum board is fed into every layer of the 12 layer dryer by using a bridge distribution computing device in accordance to the program. The dryer is divided into two zones, the use of warm steam as the warmth source. While the warm air paper gypsum board slowly strikes ahead in the dryer, it always exchanges warmth with the longitudinally flowing warm air. The board absorbs heat, and the temperature rises.

Gypsum board manufacturing line Decoration and veneer sectionAfter making use of adhesive and pressing, the paper gypsum board is flipped over and then utilized with adhesive and pressed for curing. After that, it is cut, bound, and saved in boxes.Main Performance of Gypsum Board(1) Low manufacturing electricity consumption.

Gypsum board from Gypsum plasterboard production line installationBefore starting to install the gypsum board, please ensure that you have prepared the materials you will need and use:Screw• Pins• Washers• Drill• Metal profiles U and CTrimming knitT-shaped rulerAdhesive applicator• A tape measure• A pencilA hammer• Sound insulation tapeStep 1: Control the wallDetermine the location and safety of the composite wall. Mark the fixed line of the U-shaped profile with a pencil.

Add foaming agent to the storage tank. When in use, the foaming agent and moisture are respectively sent to the foaming device by the metering pump, and compressed air is introduced to produce stable foam, which is sent to the vertical mixer.After the adhesive is prepared in the tank, it is fed into the spray ports on both sides of the forming station, and the adhesive tape is sprayed onto both sides of the paper gypsum board.

Add foaming agent to the storage tank. When in use, the foaming agent and moisture are respectively despatched to the foaming machine via the metering pump, and compressed air is delivered to produce secure foam, which is despatched to the vertical mixer.After the adhesive is organized in the tank, it is fed into the spray ports on each aspects of the forming station, and the adhesive tape is sprayed onto each facets of the paper gypsum board.

Gypsum board production line Decoration and veneer sectionAfter applying adhesive and pressing, the paper gypsum board is flipped over and then applied with adhesive and pressed for curing. After that, it is cut, bound, and stored in boxes.Main Performance of Gypsum Board(1) Low production energy consumption. The unit production energy consumption of the binder gypsum used for producing paper gypsum board is 78% lower than that of cement.(2) Lightweight insulation, using paper faced gypsum board as a partition, weighing only 1/3 1/4 of a brick wall.

Gypsum that has been overwhelmed and heated to cast off 75% of its water content material is acknowledged as plaster of Paris. When water is delivered to this first-class white powder, the ensuing cloth is without difficulty molded into any favored shape. Upon drying, the reconstituted gypsum regains its rock-like characteristics whilst preserving the favored shape.

Gypsum board production line Drying sectionThe paper gypsum board is fed into each layer of the 12 layer dryer by a bridge distribution machine according to the program. The dryer is divided into two zones, using hot steam as the heat source. While the hot air paper gypsum board slowly moves forward in the dryer, it continuously exchanges heat with the longitudinally flowing hot air. The board absorbs heat, and the temperature rises. The free water in the board slowly evaporates, but it does not damage the crystalline water of the dihydrate gypsum.

PVC laminated gypsum ceiling tilesand Gypsum tile machine Introduction1）Automatic Sending Board MachineAutomatically sending board machine includes lift platform, automatic sending board mechanics. It adjust the gypsum board height by photoelectric switch, gypsum board is sent to production line by automatic mechanics, and it, adjust the speed and frequency of delivery board by photoelectric switch2）Cleaning MachineIf there has dust on the surface of gypsum board, it will effect the lamination and product quality, so before filming, we will dust the gypsum board, the cleaning machine incl

Fracture load: basically can reach the level of similar foreign products.Low yield: According to the national standard classification provisions, the first-grade product rate produced by 4 million square meters of gypsum board factory is generally below 90%, the pass rate is about 95%, and the production waste is large.Scale and output: domestic gypsum board production line is only a 4 million m2 scale, from the economic scale requirements, the current production line below 1000m2 unit product investment income is small, high unit consumption, product quality is unstable, compared with large-s

The charging of the batching workshop adopts electric crane, and the working area of the crane covers the whole batching workshopThe dust collector of the batching workshop is arranged outside the workshop, and the dust removal points include scoring machine and mixing mixerThree control part: single outlet, trimming specification 2 ~ 3M, equipped with edging machine, 2 stacking platforms, bag dust collector and dust collector arranged outside the workshopGuard board saw, waste board crusher, and attached bag dust collectorQuantity of production line crossing the bridge: one No.

Backing Gypsum BoardsUses of Backing Gypsum Boards from gypsum board machine:For the partitions and ceilings.gypsum-based fiberboardPartitions and tiles made of gypsum plaster blocksScreeds with self-leveling properties.Drywall White Board from gypsum board machine:Drywall is made out of skinny gypsum board panels used to construct walls. The board consists of two layers of specific paper with a layer of gypsum rock sandwiched between them.

Gypsum board DescriptionIt is made of excessive exceptional gypsum cloth which is environmental safety and does no longer include any hazardous chemicals. Its feature of humidity adjustment gives a wholesome dwelling environment. The gypsum board is appropriate for the A Class necessities of the countrywide requirements of GB6566-2001 for Building Materials Radionuclide Limits.Gypsum board kindGypsum Board Series1. Regular Series of Gypsum Board2.

In its pure form, gypsum is white, however impurities regularly provide it hues like gray, brown, pink, or black. Gypsum that has been overwhelmed and heated to put off 75% of its water content material is regarded as plaster of Paris.

1. Classification of gypsum board from Gypsum board plantThe gypsum boards from Gypsum board plantproduced in China by and large include: paper confronted gypsum board, ornamental gypsum board, gypsum hole strip board, fiber ypsum board, gypsum sound-absorbing board, positioning factor gypsum board, etc.(l) Paper confronted gypsum board. Paper gypsum board is a light-weight board made with gypsum slurry as the core and paper as the cowl on each sides.

Characteristics of gypsum board:1.Sound insulation: Double-layer separation sound insulation partitions made of skinny plates and double-layer sound insulation partitions made of gap strip boards have a sound insulation have an impact on equal to a 24cm thick brick wall, and the sound insulation index can attain 40-50 decibels.2.Fire resistance: Gypsum board is a non-combustible cloth and has superb furnace resistance properties.

Backing Gypsum BoardsUses of Backing Gypsum Boards from gypsum board machine:For the partitions and ceilings.gypsum-based fiberboardPartitions and tiles made of gypsum plaster blocksScreeds with self-leveling properties.Drywall White Board from gypsum board machine:Drywall is made out of skinny gypsum board panels used to construct walls. The board contains two layers of distinctive paper with a layer of gypsum rock sandwiched between them.

Properties of Gypsum Board from gypsum board machine:1. Gypsum Is Fire-Resistant:Gypsum boards are fireplace resistant and shield the shape from furnace threats by using stopping the fireplace from spreading further. Due to chemically sure water in the gypsum, it possesses a fire-resistant quality. When gypsum boards are uncovered to fire, the water contained inside the gypsum evaporates, forming a shielding layer.2.