Flue gas desulfurization Process-manufacture,factory,supplier from China

(Total 24 Products for Flue gas desulfurization Process)
If the flue gas desulfurization gypsum and coal powder from power plants are not treated in a timely and reasonable manner, a large area of land will be utilized, and even unnecessary secondary pollution will be brought to the environment. Desulfurization gypsum from power plants has the characteristics of high taste and small particles. However, with the widespread application of gypsum method and limestone/wet lime in thermal power plants in China, the production of desulfurization gypsum has rapidly increased due to its by-products.
Contact Now
Each nozzle is equipped with multiple air outlets, which can freely adjust different wind directions of each nozzle, so that the moisture content error of the same gypsum board in different parts does not exceed 1%Forced dehumidification by fan is conducive to the drying of gypsum board.When adjusting the temperature of the dryer, the cooling and heating adjustment reaction is rapid.The hot blast stove automatically adjusts the coal feeding amount according to the flue gas temperature, with high thermal efficiency.
Contact Now
The process of plaster equipment can be summarized as follows: plaster ore → vibrating feeder → jaw crusher → bucket elevator → raw material warehouse → grinding machine → bucket elevator → fluidized bed furnace → bucket elevator → conveyor → clinker warehouse cooling, storage → finished product. The grinding process is particularly crucial.
Contact Now
The process of plaster equipment can be summarized as follows: plaster ore → vibrating feeder → jaw crusher → bucket elevator → raw material warehouse → grinding machine → bucket elevator → fluidized bed furnace → bucket elevator → conveyor → clinker warehouse cooling, storage → finished product. The grinding process is particularly crucial.
Contact Now
This method is still widely used in the domestic ceramic industry.Pressure steaming method for frying pasteThis method first preheats the raw Plaster with a block size of 25-50mm after coarse crushing in hot air at 60 ℃, and then places it in a pressure cooker for 5-7 hours with saturated superheated steam at 1,3 atmospheric pressure (125 ℃). Then, hot dry gas at 200 ℃ is introduced until hot dry gas is discharged, resulting in a vapor pressure of hemihydrate Plaster.
Contact Now
 A fluidized bed boiler is a rectangular vessel with a porous gas distribution plate at the bottom. There is a vertical partition inside the furnace, which divides the furnace into two parts, and there are a number of heating tubes inside. At the top of the furnace is a bellows connected to the furnace.The powder is filled into the furnace regularly, and the air is blown into the bottom of the furnace through the air distribution plate to realize the fluidization of the powder.
Contact Now
Annual capacity/M2Day capacity(sheet)1200×2400×9mmDrier layerControl system2Million23004PLC4Million46006PLC6Million69008 DCS1. Preparation of clinker: The primary uncooked cloth is desulfurization gypsum, with the essential factor being CaSO4.2H2O, which can be bought after kiln conversion β Type semi hydrated gypsum is constructing gypsum.2.
Contact Now
Based on over 20 years of research and development experience in plaster making equipment, Liming Heavy Industry Technology has developed a patented technology for the production of high yield and high energy plaster powder. This technology is a dry production method that achieves self grinding and self selection. Through a frequency conversion high-speed powder separator, plaster can be directly ground to meet the GB/T9776-2008 standard for building plaster, without the need for external screening or sorting.
Contact Now
According to customer needsMATERIALPlaster, chalk, clay, slurry and filter cake.APPLICATIONHeating Plant of limestone desulfurization project, stone powder maker for high-grade highways, coal grinding mill in environmental protection type boiler plant, the mill in mining firms.Introduction of raw materials of Automatic plaster machineThe Plaster ores are crushed into small granules of the size less than 30mm, conveyed to mills to complete selecting and separating, and then the qualified powder are delivered into fluidized bed boiler for calcinations while the rest return to the mill.
Contact Now
Based on over 20 years of lookup and improvement journey in plaster making equipment, Liming Heavy Industry Technology has developed a patented technological know-how for the manufacturing of excessive yield and excessive power plaster powder. This science is a dry manufacturing technique that achieves self grinding and self selection.
Contact Now
Process and tools selectionAccording to the procedure requirements, the building plaster tools is generally divided into 5 parts, particularly the crushing system, grinding system, calcination system, storage and transportation system, and electrical manage system.Material transportation:The overwhelmed plaster uncooked fabric is transported by way of a hoist to a storage bin for backup.
Contact Now
Plastering Equipment is to grind natural dihydrate Plaster ore (raw Plaster) or industrial by-product Plaster (desulfurization Plaster, phosphoPlaster, etc.) through a dedicated grinding machine and heat and calcine it at a certain temperature to dehydrate and decompose the dihydrate Plaster, resulting in β The product with hemihydrate Plaster (CaSO4.1/2H2O) as the main component is building Plaster (commonly known as Plaster). In summary, there are several main Plastering Equipment processes for Plaster powder:(1) Calcine Plaster blocks and then crush them.This method first places Plaste
Contact Now
During the crushing stage of the Plaster powder manufacturing process, the measurement and specs of the extracted Plaster ore vary. According to the real situation, appropriate crushing gear is chosen for preliminary crushing treatment, and particles with a particle measurement of no extra than 35mm are crushed. 1.
Contact Now
During the crushing stage of the Plaster powder manufacturing process, the measurement and specs of the extracted Plaster ore vary. According to the authentic situation, appropriate crushing gear is chosen for preliminary crushing treatment, and particles with a particle measurement of no extra than 35mm are crushed. 1.
Contact Now
Gypsum board produce Process flow:Gypsum in the fabric yard - Calcination - Abrasives - Cooling storage - Clinker dimension - Mixing (water, dry cloth additives, moist fabric additives) - Forming (protective paper) - Forming (adhesive edge) - Solidification - Cutting - Drying - Screening - Sawing area - Sealing area - StackingAnnual capacity/M2Day capacity(sheet)1200×2400×9mmDrier layerControl system2Million23004PLC4Million46006PLC6Million69008 DCS1.
Contact Now
Process and equipment selectionAccording to the process requirements, the construction plaster equipment is usually divided into five parts, namely the crushing system, grinding system, calcination system, storage and transportation system, and electrical control system. Material transportation:The crushed plaster raw material is transported by a hoist to a storage bin for backup. The storage bin is designed according to the requirements for material storage time to ensure a stable supply of materials.
Contact Now
The gypsum powder calcination area can be divided into the following processes according to the transportation process of gypsum powder: gypsum raw material storage yard, grinding&drying, calcination, cooling, grinding, and storage. Before calcination, gypsum is mainly composed of dihydrate gypsum, and calcination is the process of converting dihydrate gypsum into hemihydrate gypsum. The calcined gypsum is mainly composed of hemihydrate gypsum.The dry addition area includes gypsum powder, starch, coagulants, retarders, refractory materials, cement, etc.
Contact Now
Wall Plaster Machine Process flowThe powder determination laptop sends the Plaster uncooked powder that has reached the required fineness after grinding to the fluidized mattress furnace for calcination, and the relaxation is back to the mill for in addition grinding till it is qualified.
Contact Now
 We have extremely high professional degrees in mixing systems. The accumulation of more than ten years of experience in product innovation and application research and development enables us to deal with the mixed problems of our customers. Core mixing products include: double spiral cone mixer, horizontal belt mixer, horizontal plow mixer and Forberg mixer. With complete product variety and specifications, customers can choose the most suitable machine according to production capacity, environment and process.
Contact Now
During the crushing stage of the Plaster powder production process, the size and specifications of the extracted Plaster ore vary. According to the actual situation, suitable crushing equipment is selected for preliminary crushing treatment, and particles with a particle size of no more than 35mm are crushed. 1. Jaw crusher: The feed particle size of the jaw crusher is ≤ 1200mm, the discharge particle size is 10350mm, and the production capacity can reach 11000t/h.
Contact Now
Process: Introduction to Wall Plastering Machine Process 1: The crusher crushes large-sized Plaster ore into small particles smaller than 25mm, which are stored and transported into a mill for grinding. The powder selection machine then sends the Plaster raw powder that reaches the required fineness of the product to a fluidized bed furnace for calcination, and the rest is returned to the mill for further grinding until it is qualified. The qualified Plaster powder after calcination is sent to the clinker warehouse for storage or to the product workshop for use. 2.
Contact Now
Process: Introduction to Wall Plastering Machine Process1: The crusher crushes large-sized Plaster ore into small particles smaller than 25mm, which are saved and transported into a mill for grinding. The powder choice desktop then sends the Plaster uncooked powder that reaches the required fineness of the product to a fluidized mattress furnace for calcination, and the relaxation is again to the mill for similarly grinding till it is qualified.
Contact Now
Gypsum board equipment Process flow: Gypsum in the material yard - Calcination - Abrasives - Cooling storage - Clinker measurement - Mixing (water, dry material additives, wet material additives) - Forming (protective paper) - Forming (adhesive edge) - Solidification - Cutting - Drying - Screening - Sawing edge - Sealing edge - StackingAnnual capacity/M2Day capacity(sheet)1200×2400×9mmDrier layerControl system2Million23004PLC4Million46006PLC6Million69008 DCS1.
Contact Now
How is the gypsum powder produced? The crusher breaks the large-size gypsum ore into small pieces of 25 mm, and then sends the small pieces to the grinder. After grinding, the qualified gypsum powder is sent to the boiling furnace for calcination, and the unqualified part is sent to the grinder until qualified. After calcination, the qualified gypsum powder is sent to the screw conveyor through the elevator.The screw conveyor sends the calcined gypsum powder to the silo for storage, and in the process, the gypsum powder is cooled.
Contact Now
Relate News
French materials producer Saint-Gobain has begun production of zero-carbon plasterboard at its modernised plant in Fredrikstad, southeast Norway.The company says its decarbonisation of the manufacturing process was made possible by switching from natural gas to hydroelectric power, thus avoiding 23,000 tons of carbon dioxide emissions a year.Energy is also saved by improved heat recovery and a more efficient manufacturing process, which has reduced energy use at the site by 30% and increased capacity 40%.According to Saint-Gobain, this will enable it to launch a full range of plasterboard prod
Mount Taishan Gypsum High Quality Development Conference Held in Tai'an, ShandongGypsum board is the basic material in building decoration materials. As a link between consumers and enterprises, strengthening a brand is crucial for enterprises to maintain their market advantage. In the process of brand building, innovation in enterprise products, services, and business models is crucial to meet the needs of different customers at different levels and improve consumer satisfaction.
The high-end gypsum board production project of Beixin Building Materials (Hezhou) Co., Ltd. has a total investment of 277 million yuan, covering an area of 148.9 acres, a building area of 40300 square meters, and an annual production of 30 million square meters of paper gypsum board and 10000 tons of light steel keel production line project has been completed in the factory area. The expected annual output value is 300 million yuan.
We will Attend The 134th China Import and Export Fair ("Canton Fair" or "the Fair") on October 15-19 Contruction Machinery Exhibition Hall. Hope to see you at the exhibition.In addition, the 134th Canton Fair will support global buyers on Chinese visa application in a timely and smooth manner, as well as simplify on-site registration process to improve exhibition attending efficiency.
With the increasing improvement of people's quality of life and under the guidance of the "dual carbon" goal, building decoration materials are undergoing a transformation and upgrading transformation.
On the basis of achieving "investment in the same year, profit in the same year" in the Tanzania production line of Beixin Building Materials, the construction of a new line with an annual output of 15 million square meters of paper faced gypsum board will be completed in 2021 and officially put into operation in 2022.
Since the provincial party committee and government proposed the policy of "determining production based on slag" in 2018, the inventory of phosphogypsum slag yards in Machangping, Fuquan, Guizhou Phosphate Group has gradually decreased. In the first three quarters of this year, the company utilized and disposed of 7.3234 million tons of phosphogypsum, a year-on-year increase of 10%.
On March 15th, the annual production of 450000 tons of calcined gypsum powder project by Hubei Shengfeng Environmental Protection Technology Co., Ltd. began construction in Yujiahu Industrial Park, Baokang Economic Development Zone.It is understood that the project is planned to be constructed in two phases. The first phase will have an annual output of 450000 tons of calcined gypsum powder, accompanied by a production line for harmless treatment of 600000 tons of phosphogypsum per year.
Oman’s Ministry of Transport, Communications and Information Technology (MTCIT) has announced the launch of a competitive tender for the award of a contract for the construction and operation of a pier dedicated to the handling of minerals at Manji in Dhofar Governorate.The project will enable the large-scale commercial development of the prodigious reserves of gypsum and other industrial minerals found in the pier’s hinterland, a sprawling area encompassing the Wilayat of Shaleem and Al Halaniyat Islands in the southeast of the Sultanate of Oman.Interested local and international companies wi
On October 26th, the concentrated commencement of major projects in the fourth quarter of 2023 in Yichang City was held, with sub venues set up in each county and city. Secretary of the Zhijiang Municipal Party Committee, Yu Feng, participated in the event at the Zhijiang branch venue.
x

Submitted successfully

We will contact you as soon as possible

Close