FGD Plant-manufacture,factory,supplier from China

(Total 24 Products for FGD Plant)
If the flue gas desulfurization gypsum and coal powder from power plants are not treated in a timely and reasonable manner, a large area of land will be utilized, and even unnecessary secondary pollution will be brought to the environment. Desulfurization gypsum from power plants has the characteristics of high taste and small particles. However, with the widespread application of gypsum method and limestone/wet lime in thermal power plants in China, the production of desulfurization gypsum has rapidly increased due to its by-products.
Contact Now
Because the keel is made of wood, attention must be paid to fire prevention. The standard practice is to evenly apply fireproof coating on the surface of the keel, wait for the entire keel to turn white, and then nail it on the wall to ensure that the area in contact with the wall is also coated with fireproof coating.After the fireproof treatment is completed on the surface of the keel, the assembly can begin. The workers will use a nail gun to fix the joint of the two keels at an angle of 45 degrees.
Contact Now
According to customer needsMATERIALPlaster, chalk, clay, slurry and filter cake.APPLICATIONHeating Plant of limestone desulfurization project, stone powder maker for high-grade highways, coal grinding mill in environmental protection type boiler plant, the mill in mining firms.Introduction of raw materials of Automatic plaster machineThe Plaster ores are crushed into small granules of the size less than 30mm, conveyed to mills to complete selecting and separating, and then the qualified powder are delivered into fluidized bed boiler for calcinations while the rest return to the mill.
Contact Now
Because the keel is made of wood, interest should be paid to fireplace prevention. The wellknown exercise is to evenly observe fireproof coating on the floor of the keel, wait fore keel. the complete keel to flip white, and then nail it on the wall to make certain that the place in contact with the wall is additionally lined with fireproof coating.After nailing the keel frame, it is imperative to repair it to the wall.
Contact Now
Plasterboard equipment 1# transverse kiln entry section: it in most cases consists of the automated manipulate of the pipeline of conveyor belt, curler table, solenoid valve, distributor and plate entry accelerator.
Contact Now
Plasterboard machinery 1# transverse kiln entry section: it mainly includes the automatic control of the pipeline of conveyor belt, roller table, solenoid valve, distributor and plate entry accelerator.
Contact Now
Proportioning and molding section: it more often than not consists of gypsum powder metering scale, auxiliary powder scale, two variable frequency slurry pumps, automated manipulate of conveying knife and slurry mixer, molding station mixer, platform vibration motor and different equipment, which can recognise the proportional addition of gypsum powder, auxiliary powder and slurry, and entire the computerized proportioning of the complete system, which can no longer solely retailer personnel,&nb
Contact Now
Proportioning and molding section: it mainly includes gypsum powder metering scale, auxiliary powder scale, two variable frequency slurry pumps, automatic control of conveying knife and slurry mixer, molding station mixer, platform vibration motor and other equipment, which can realize the proportional addition of gypsum powder, auxiliary powder and slurry, and complete the automatic proportioning of the whole system, which can not only save personnel, but also accurately proportioningCentral control section: the main equipment includes solidification belt forming machine, conveying roller mac
Contact Now
Gypsum board DescriptionIt is made of excessive exceptional gypsum cloth which is environmental safety and does now not incorporate any dangerous chemicals. Its characteristic of humidity adjustment presents a wholesome residing environment.
Contact Now
Gypsum board DescriptionIt is made of high quality gypsum material which is environmental protection and does not contain any harmful chemicals. Its function of humidity adjustment provides a healthy living environment.
Contact Now
Plasterboard equipment 1# transverse kiln entry section: it normally consists of the automated manage of the pipeline of conveyor belt, curler table, solenoid valve, distributor and plate entry accelerator.
Contact Now
1. Classification of gypsum board from Gypsum board plantThe gypsum boards from Gypsum board plantproduced in China mainly include: paper faced gypsum board, decorative gypsum board, gypsum hollow strip board, fiber ypsum board, gypsum sound-absorbing board, positioning point gypsum board, etc.(l) Paper faced gypsum board. Paper gypsum board is a lightweight board made with gypsum slurry as the core and paper as the cover on both sides. Paper gypsum board is lightweight, high-strength, fire-resistant, mothproof, and easy to process.
Contact Now
1. Classification of gypsum board from Gypsum board plantThe gypsum boards from Gypsum board plantproduced in China by and large include: paper confronted gypsum board, ornamental gypsum board, gypsum hole strip board, fiber ypsum board, gypsum sound-absorbing board, positioning factor gypsum board, etc.(l) Paper confronted gypsum board. Paper gypsum board is a light-weight board made with gypsum slurry as the core and paper as the cowl on each sides.
Contact Now
Technical indicators of plaster powder products1. Product quality: Meet or exceed the requirements of the national "Building Plaster" standard (GB9776-2008).2. Fineness: 80-200 mesh, with a residue of 10%.3. Bending strength (directly related to raw materials): ≥ 1.6Mpa; Compressive strength: ≥ 3.0Mpa.4. Main phase composition: Content of hemihydrate plaster: ≥ 80% adjustableContent of plaster dihydrate:<5% adjustableSoluble anhydrous plaster content:<5% adjustable5. Initial setting time: 3-8 minutes adjustable; Final setting time: 6-15 minutes adjustable.6.
Contact Now
Process and equipment selectionAccording to the process requirements, the construction plaster equipment is usually divided into five parts, namely the crushing system, grinding system, calcination system, storage and transportation system, and electrical control system. Material transportation:The crushed plaster raw material is transported by a hoist to a storage bin for backup. The storage bin is designed according to the requirements for material storage time to ensure a stable supply of materials.
Contact Now
Analysis of main equipment of Plasterboard machineAdditive ListCalculate by thickness 12.5mm gypsum board7.6-8.3kg/㎡ Unit weight gypsum board:7.6-8.3kg/m2NoRaw   materialconsumption1gypsum   powder6.2-6.8kg/㎡2water4.5-5.0kg/㎡3paper0.35kg/㎡4starch25~40g/㎡5water   reducing agent15~45g/㎡6Retarder0~4g/㎡7accelerator0~35g/㎡8foaming   agent2~4g/㎡9white   latex2~4g/㎡Our company advantagesAs we all know, there are four fundamental factors that determine the quality of gypsum boardThe first is drying technology.With what kind of drying technology, the gypsum board can be dried m
Contact Now
Water is brought to the plaster of Paris mixture to shape a slurry of the appropriate consistency. An asphalt emulsion and/or a wax emulsion is brought to acquire the favored degree of moisture resistance in the remaining product. A foaming agent such as a detergent is included, and in the course of the mixing technique air is entrained into the material.
Contact Now
Capacity/M2Specification /mmShaping Number(piece)/timeShaping time/hourlengthheightthickness100,000   666mm   500mm   (80-230mm)85-7120,000105-7150,000125-7200,000165-7250,000185-7300,000215-7350,000245-7
Contact Now
1. Jaw crusherThe feed particle size of the jaw crusher is ≤ 1200mm, the discharge particle size is 10-350mm, and the production capacity can reach 1-1000t/h. Suitable for coarse crushing of large blocks of Plaster, with strong crushing ability and high crushing ratio.2. Impact crusherThe feed particle size of the impact crusher is ≤ 1300mm, with a production capacity of 30-2000t/h. It is suitable for medium to fine crushing of Plaster with low hardness and Mohs hardness level 2, and the discharge particle shape is good and the particle size is uniform.3.
Contact Now
In order to attain the above requirement, our enterprise have researched and developed a complete set of boiling furnace processing technology, the major fabric is good-quality steel. For example, warmth conductive oil pipe adopts seamless metal pipe (GB3087-82).
Contact Now
Grinding system:The plaster uncooked components in the storage bin are fed into the grinding computing device through a vibrating feeder for precision processing. An electromagnetic vibration feeder is set up below the storage bin, which is interlocked with the mill to adjust the grant of resources in real-time based totally definitely on the operation of the mill.The fabric is uniformly and consistently fed into the mill via an electromagnetic vibration feeder for grinding.
Contact Now
Automatic wall plaster machine TechnologyAutomatic wall plaster machine Capacity List                Capacity/TTon/hourRaw   gypsum rock consumption T/yearBoiling   furnace size30,0004.236,0004.5M×1.2M×1.4M50,0006.960,0004.5M×1.4M×1.6M60,0008.372,0004.5M×1.6M×1.8M80,00011.1196,0004.5M×1.8M×2.0M100,00013.88120,0004.5 M×2.0 M×2.2 M150,00020.83180,0004.5 M×2.2 M×2.4 M200,00027.77240,0004.5 M×2.4 M×2.6 MProduct relevant parameter (GB9776-88《constructional gypsum》which comes from the Gypsum Powder Manufacturing Machine.1.
Contact Now
Calcination stageAfter the grinding is completed, the Plaster powder that meets the grinding requirements is despatched by way of the powder resolution computer to the rotary kiln for calcination treatment.
Contact Now
Backing Gypsum BoardsUses of Backing Gypsum Boards from gypsum board machine:For the walls and ceilings.gypsum-based fiberboardPartitions and tiles made of gypsum plaster blocksScreeds with self-leveling properties.Drywall White Board from gypsum board machine: Drywall is made out of thin gypsum board panels used to build walls. The board comprises two layers of special paper with a layer of gypsum rock sandwiched between them.
Contact Now
Relate News
Recently, the second gypsum production line of Guizhou Yongdingshun Gypsum Building Materials Co., Ltd., a key investment attraction project of Guizhou Jinyuan Qianxi Power Plant, has been completed and put into operation. The production line will consume 240000 tons of gypsum and 120000 tons of steam from Qianxi Power Plant annually.It is reported that Guizhou Yongdingshun Gypsum Building Materials Co., Ltd. is a key investment attraction enterprise of Qianxi Power Plant.
Saint-Gobain, a French building products manufacturer, announced plans this week to invest $235 million across the next two years in the expansion and modernization of its CertainTeed gypsum manufacturing facility in Palatka, Florida.Per a company statement, the primary objective of the investment is to increase the production capacity of the existing plant while concurrently improving its energy consumption. The expansion of the facility will also involve the installation of energy-saving equipment and automation technology.
PALATKA, Fla.--(BUSINESS WIRE)--Saint-Gobain North America, through its building products subsidiary CertainTeed Interior Products Group, today announced plans to invest $235 million over the next two years to expand its CertainTeed gypsum manufacturing facility in Palatka, Florida, more than doubling the production capacity of the existing manufacturing plant and creating over 100 new, permanent jobs.The expansion of manufacturing and warehouse space in Palatka, which is strategically located near the Port of Jacksonville, comes as Saint-Gobain continues to implement its global Grow and Impac
Saint-Gobain announces the inauguration of a new plaster and plasterboard factory in Yuzhou, Henan province, China, to set foot on the markets of central and northwestern China. This is the sixth gypsum site of the Group in the country. This new site will produce high-quality paper-faced plasterboards and gypsum powders to respond to the strong demand of the local construction market.
French materials producer Saint-Gobain has begun production of zero-carbon plasterboard at its modernised plant in Fredrikstad, southeast Norway.The company says its decarbonisation of the manufacturing process was made possible by switching from natural gas to hydroelectric power, thus avoiding 23,000 tons of carbon dioxide emissions a year.Energy is also saved by improved heat recovery and a more efficient manufacturing process, which has reduced energy use at the site by 30% and increased capacity 40%.According to Saint-Gobain, this will enable it to launch a full range of plasterboard prod
Saint-Gobain North America, through its building products subsidiary CertainTeed Interior Products Group, announced plans July 10 to invest $235 million over the next two years to expand its CertainTeed gypsum manufacturing facility in Palatka.The expansion will more than double the production capacity of the existing manufacturing plant and create more than 100 new jobs, according to a news release.“These are important and high-quality new jobs for our region.
The Bristol expansion will double site capacity and will have a core focus on sustainability.Lightweight construction manufacturer Etex is set to double the plasterboard production capacity of its Ferrybridge plant upon the opening of its new factory in 2023.Work is well underway for the new 57,000m2 Siniat facility, which comes at a time when plasterboard and timber shortages continue to put pressure on the supply chain.The new facility is a significant investment by Etex and demonstrates its commitment to supporting the future of British manufacturing, as well as its eagerness to increase re
On the morning of June 1st, the opening ceremony of Saint Gobain Technology Materials (Henan) Co., Ltd. was grandly held in Yuzhou City, Henan Province.
The 17th National Gypsum Technology Exchange Conference and Exhibition, as well as the 13th China Building Materials Federation Gypsum Building Materials Branch Annual Meeting in 2023, opened in Yidu City, Hubei Province. More than 40 experts and scholars from various research institutions across the country, as well as over 500 enterprises and nearly 900 representatives, attended the conference.
On August 23, 2022, sponsored by the Gypsum Branch of the China Building Materials Federation and the People's Government of Yichang City, and organized by the National Environmental Protection Industry Byproduct Gypsum Resource Utilization Engineering Technology Center, among others, The 16th National Gypsum Technology Exchange Conference and Exhibition and the 12th China Building Materials Federation Gypsum Building Materials Branch Annual Meeting, co organized by Yifu Technology Co., Ltd. and others, were grandly held at Xindao International Hotel in Yichang City, Hubei Province.
x

Submitted successfully

We will contact you as soon as possible

Close