Drywall production line-manufacture,factory,supplier from China

(Total 24 Products for Drywall production line)
There are gypsum boards from Plasterboard production line with different edges on the market, such as round edges, tapered edges, beveled edges, square edges, tongue edges, groove edges, etc.Gypsum board has various characteristics, so there is a huge demand in the construction fieldGypsum board from Plasterboard production line has good thermal performanceGypsum also has good thermal performance, so it provides a good balance between indoor humidity and temperature.
Contact Now
Raw materials: Due to the small scale of domestic production lines, raw gypsum is generally not homogenized directly into grinding and calcining.
Contact Now
Gypsum board from Plasterboard production line informationThere are various innovative materials on the market that enhance the aesthetics and functionality of buildings.Gypsum board from Plasterboard production line is a popular building material, mainly composed of non combustible cores made of gypsum. Gypsum board is a widely used building material in indoor structural design.Gypsum has various properties, so there are various gypsum products used in the construction industry.
Contact Now
Gypsum board from Gypsum plasterboard production line installationBefore starting to install the gypsum board, please ensure that you have prepared the materials you will need and use:Screw• Pins• Washers• Drill• Metal profiles U and CTrimming knitT-shaped rulerAdhesive applicator• A tape measure• A pencilA hammer• Sound insulation tapeStep 1: Control the wallDetermine the location and safety of the composite wall. Mark the fixed line of the U-shaped profile with a pencil.
Contact Now
Gypsum board from Gypsum plasterboard production line is a commonly used building material in construction projects, such as suspended ceilings, suspended ceilings, false ceilings, partition walls, etc. It is covered on both sides with cardboard, and the center is made of gypsum material.
Contact Now
The charging of the batching workshop adopts electric crane, and the working area of the crane covers the whole batching workshopThe dust collector of the batching workshop is arranged outside the workshop, and the dust removal points include scoring machine and mixing mixerThree control part: single outlet, trimming specification 2 ~ 3M, equipped with edging machine, 2 stacking platforms, bag dust collector and dust collector arranged outside the workshopGuard board saw, waste board crusher, and attached bag dust collectorQuantity of production line crossing the bridge: one No.
Contact Now
Raw materials: Due to the small scale of home manufacturing lines, uncooked gypsum is commonly now not homogenized at once into grinding and calcining.
Contact Now
Gypsum board is made of gypsum, ithas been used as a establishing material for thousands of years. Today, drywall panels are notably used in current constructions spherical the world.In addition to being accessible to install, drywall affords a fire protection measure for buildings. Gypsum consists of a large extent of water in the form of crystals; 10 rectangular feet (1.0 rectangular meters) of drywall contains greater than two quarts (21) of water.
Contact Now
 Plaster grinding main equipment introductionPlaster powder is the bulk of Plaster for a series of treatment of the powder, the finished particle size is usually about 80-325 mesh, from the entire production process of Plaster grinding, the need to use the equipment mainly jaw crusher, Raymond mill and so on.Jaw crusher: also called jaw crusher, referred to as broken jaw. Mainly responsible for the rough crushing processing of Plaster. The working principle of extrusion crushing is adopted.
Contact Now
 Drywall making machine CapacityAnnual capacity/M2Day capacity(sheet)1200×2400×9mmDrier layerControl system2Million23004PLC4Million46006PLC6Million69008 DCS 10Million115001020Million2300012Gypsum ore is extracted from quarries or mines and then broken into smaller, more manageable sizes. The water content of the material is then assessed before entering the grinder. Gypsum ores with water content greater than 0.5% (by weight) are treated with rotary dryers.
Contact Now
Detailed rationalization of Plaster grinding method flowStep 1: Large stones flip into small stonesThe giant Plaster uncooked substances want to be first overwhelmed by means of a jaw crusher till they can attain the feed fineness of the grinding machine.Step 2: Turn small stones into stone powderPlaster that meets the necessities for grinding fineness is despatched to the Plaster particle silo through a raise machine, and then continually and evenly
Contact Now
Plaster grinding most important gear introductionPlaster powder is the bulk of Plaster for a sequence of remedy of the powder, the completed particle measurement is commonly about 80-325 mesh, from the complete manufacturing system of Plaster grinding, the want to use the tools typically jaw crusher, Raymond mill and so on.Jaw crusher: additionally referred to as jaw crusher, referred to as damaged jaw.
Contact Now
Fracture load: basically can reach the level of similar foreign products.Low yield: According to the national standard classification provisions, the first-grade product rate produced by 4 million square meters of gypsum board factory is generally below 90%, the pass rate is about 95%, and the production waste is large.Scale and output: domestic gypsum board production line is only a 4 million m2 scale, from the economic scale requirements, the current production line below 1000m2 unit product investment income is small, high unit consumption, product quality is unstable, compared with large-s
Contact Now
Detailed clarification of Plaster grinding system flowStep 1: Large stones flip into small stonesThe giant Plaster uncooked substances want to be first overwhelmed with the aid of a jaw crusher till they can attain the feed fineness of the grinding machine.Step 2: Turn small stones into stone powderPlaster that meets the necessities for grinding fineness is despatched to the Plaster particle silo by using a carry machine, and then always and evenly fe
Contact Now
Add foaming agent to the storage tank. When in use, the foaming agent and moisture are respectively sent to the foaming device by the metering pump, and compressed air is introduced to produce stable foam, which is sent to the vertical mixer.After the adhesive is prepared in the tank, it is fed into the spray ports on both sides of the forming station, and the adhesive tape is sprayed onto both sides of the paper gypsum board.
Contact Now
In its pure form, gypsum is white, however impurities regularly provide it hues like gray, brown, pink, or black. Gypsum that has been overwhelmed and heated to put off 75% of its water content material is regarded as plaster of Paris.
Contact Now
Gypsum board is made of gypsum, ithas been used as a constructing fabric for hundreds of years. Today, drywall panels are extensively used in modern-day constructions round the world. In addition to being handy to install, drywall affords a hearth safety measure for buildings.
Contact Now
Add foaming agent to the storage tank. When in use, the foaming agent and moisture are respectively despatched to the foaming machine via the metering pump, and compressed air is delivered to produce secure foam, which is despatched to the vertical mixer.After the adhesive is organized in the tank, it is fed into the spray ports on each aspects of the forming station, and the adhesive tape is sprayed onto each facets of the paper gypsum board.
Contact Now
Plaster powder is one of the five gel materials and plays an important role in the national economy. Plaster powder production line is the natural dihydrate Plaster ore (raw Plaster) or industrial by-product Plaster (desulfurized Plaster, phosphoPlaster, etc.) calcined at a certain temperature. It is crushed to dehydrate and decompose the dihydrate Plaster.
Contact Now
Impact resistant gypsum boardStandard or simple types of gypsum boards do not have the ability to withstand impact loads, which makes their durability poor. Impact resistant gypsum board is a special type of board with strong impact resistance.The advantages of gypsum as a building materialGypsum board has the following advantages in the field of constructionGypsum provides a smooth finished surface: Gypsum is also used for gypsum, providing a smooth surface without cracks.
Contact Now
 There are various types of gypsum boards available in the market, as follows1. Fireproof gypsum boardGypsum board has good fire resistance, so it can also be used in areas prone to fire. Gypsum products are composed of water, which is chemically bound in gypsum, so it can be exposed to fire.Fire-resistant gypsum board is suitable for ceilings and gypsum boards with high fire resistance requirements.2. Standard gypsum boardThese are common and widely used gypsum boards for false ceilings. The surface of this gypsum board is made of ivory cardboard.3.
Contact Now
Uses of Fire Resistant Gypsum Boards from gypsum board machine: When a high level of fire protection is required in ceilings and drywall, this product is ideal.Water-Resistant Gypsum Board from gypsum board machine: Water Resistant Gypsum BoardsThis type has water-repellent face paper and a water-resistant gypsum core.
Contact Now
How to make plasterboard, and about the uncooked fabric is essential aspect of drywall is the mineral gypsum. It is a light-density rock observed in considerable deposits worldwide. Each molecule of gypsum (or dihydrous calcium sulfate) is composed of two mrolecules of water (H two 0) and one of calcium sulfate (CaSO 4 ).
Contact Now
Detailed explanation of Plaster grinding process flowStep 1: Large stones turn into small stonesThe large Plaster raw materials need to be first crushed by a jaw crusher until they can reach the feed fineness of the grinding machine.Step 2: Turn small stones into stone powderPlaster that meets the requirements for grinding fineness is sent to the Plaster particle silo by a lift machine, and then continuously and evenly fed into the grinding chamber of the Raymond mill for grinding processing by a vibrating feeder.Step 3: Stone powder gradingThe ground Plaster powder is graded by a powder selec
Contact Now
Relate News
Our company undertaken the project for 15 million m2 gypsum board production line in Tanzania and completed the 72 hour production acceptance.On the path of firmly promoting global layout, BNBM focuses on epidemic prevention and control while also focusing on business development. The production and sales of the North New Base in Tanzania are thriving. Despite the severe pandemic and a two-month shutdown, it has achieved full production and full sales, with a gross profit margin of 27%.
Recently, the second gypsum production line of Guizhou Yongdingshun Gypsum Building Materials Co., Ltd., a key investment attraction project of Guizhou Jinyuan Qianxi Power Plant, has been completed and put into operation. The production line will consume 240000 tons of gypsum and 120000 tons of steam from Qianxi Power Plant annually.It is reported that Guizhou Yongdingshun Gypsum Building Materials Co., Ltd. is a key investment attraction enterprise of Qianxi Power Plant.
On the basis of achieving "investment in the same year, profit in the same year" in the Tanzania production line of Beixin Building Materials, the construction of a new line with an annual output of 15 million square meters of paper faced gypsum board will be completed in 2021 and officially put into operation in 2022.
On March 15th, the annual production of 450000 tons of calcined gypsum powder project by Hubei Shengfeng Environmental Protection Technology Co., Ltd. began construction in Yujiahu Industrial Park, Baokang Economic Development Zone.It is understood that the project is planned to be constructed in two phases. The first phase will have an annual output of 450000 tons of calcined gypsum powder, accompanied by a production line for harmless treatment of 600000 tons of phosphogypsum per year.
PALATKA, Fla.--(BUSINESS WIRE)--Saint-Gobain North America, through its building products subsidiary CertainTeed Interior Products Group, today announced plans to invest $235 million over the next two years to expand its CertainTeed gypsum manufacturing facility in Palatka, Florida, more than doubling the production capacity of the existing manufacturing plant and creating over 100 new, permanent jobs.The expansion of manufacturing and warehouse space in Palatka, which is strategically located near the Port of Jacksonville, comes as Saint-Gobain continues to implement its global Grow and Impac
The high-end gypsum board production project of Beixin Building Materials (Hezhou) Co., Ltd. has a total investment of 277 million yuan, covering an area of 148.9 acres, a building area of 40300 square meters, and an annual production of 30 million square meters of paper gypsum board and 10000 tons of light steel keel production line project has been completed in the factory area. The expected annual output value is 300 million yuan.
Since the provincial party committee and government proposed the policy of "determining production based on slag" in 2018, the inventory of phosphogypsum slag yards in Machangping, Fuquan, Guizhou Phosphate Group has gradually decreased. In the first three quarters of this year, the company utilized and disposed of 7.3234 million tons of phosphogypsum, a year-on-year increase of 10%.
Exhibition time: November 7th - November 10th, 2023Exhibition location: Yidu Citizen Activity Center Exhibition CenterSponsored by: Hubei Yihua Group Co., Ltd., Yidu Municipal People's Government, Gypsum Building Materials Branch, China Building Materials Federation, Institute of Building Materials Industry Technical Information ResearchMeeting synchronization:Expert Q&A Meeting on Difficult Issues in Gypsum Production and ApplicationThe 4th Symposium on Comprehensive Utilization of PhosphogypsumThe 7th National Technical Exchange Conference on Gypsum Mortar IndustryTechnical Exchange
Saint-Gobain, a French building products manufacturer, announced plans this week to invest $235 million across the next two years in the expansion and modernization of its CertainTeed gypsum manufacturing facility in Palatka, Florida.Per a company statement, the primary objective of the investment is to increase the production capacity of the existing plant while concurrently improving its energy consumption. The expansion of the facility will also involve the installation of energy-saving equipment and automation technology.
Georgia-Pacific held a ribbon cutting recently for their  new $325 million gypsum wallboard production expansion facility.The event was invitation only and included remarks by Georgia-Pacific president of the gypsum business, David Neal, Georgia-Pacific executive vice president of building products, Andy Konieczka and Nolan County Judge Whitley MayDECA Students from Sweetwater High School were also invited to attend the Georgia -Pacific ribbon cutting event.  DECA prepares emerging leaders and entrepreneurs for careers in marketing finance, hospitality and management in hig
x

Submitted successfully

We will contact you as soon as possible

Close