2Million m2 Gypsum Line Board-manufacture,factory,supplier from China

Gypsum that has been overwhelmed and heated to solid off 75% of its water content material cloth is stated as plaster of Paris. When water is delivered to this great white powder, the ensuing material is barring situation molded into any liked shape. Upon drying, the reconstituted gypsum regains its rock-like traits even as retaining the appreciated shape.

There are gypsum boards from Plasterboard production line with different edges on the market, such as round edges, tapered edges, beveled edges, square edges, tongue edges, groove edges, etc.Gypsum board has various characteristics, so there is a huge demand in the construction fieldGypsum board from Plasterboard production line has good thermal performanceGypsum also has good thermal performance, so it provides a good balance between indoor humidity and temperature.

Gypsum board from Plasterboard production line informationThere are various innovative materials on the market that enhance the aesthetics and functionality of buildings.Gypsum board from Plasterboard production line is a popular building material, mainly composed of non combustible cores made of gypsum. Gypsum board is a widely used building material in indoor structural design.Gypsum has various properties, so there are various gypsum products used in the construction industry.

The forming place normally includes: solidification belt, solidification belt cleansing device, belt deviation corrector, tapered belt, paper feeding wheel, bonding water, forming stress plate, forming presser foot, spray water, etc. The fashioned gypsum board is step by step solidified on the solidification belt to meet the necessities of slitting. Both precise and awful molding of gypsum board is achieved here.

At present, there are almost twenty giant paper gypsum board manufacturing strains beneath building and proposed in the country, of which six are manufacturing strains with an annual output of extra than 20 million m2.

Gypsum board manufacturing line Drying sectionThe paper gypsum board is fed into every layer of the 12 layer dryer by using a bridge distribution computing device in accordance to the program. The dryer is divided into two zones, the use of warm steam as the warmth source. While the warm air paper gypsum board slowly strikes ahead in the dryer, it always exchanges warmth with the longitudinally flowing warm air. The board absorbs heat, and the temperature rises.

According to the forecast, by 2000, China's paper gypsum board demand will reach 120 ~ 150 million m2, while the current actual production capacity of China's paper gypsum board is only 60 million m2, of which, large-scale production lines account for only 1/3 output. Therefore, it can be said that the "ninth Five-Year Plan" will be a period of great development of paper gypsum board.

Fracture load: basically can reach the level of similar foreign products.Low yield: According to the national standard classification provisions, the first-grade product rate produced by 4 million square meters of gypsum board factory is generally below 90%, the pass rate is about 95%, and the production waste is large.Scale and output: domestic gypsum board production line is only a 4 million m2 scale, from the economic scale requirements, the current production line below 1000m2 unit product investment income is small, high unit consumption, product quality is unstable, compared with large-s

The forming area mainly includes: solidification belt, solidification belt cleaning device, belt deviation corrector, tapered belt, paper feeding wheel, bonding water, forming pressure plate, forming presser foot, spray water, etc. The formed gypsum board is gradually solidified on the solidification belt to meet the requirements of slitting. Both good and bad molding of gypsum board is done here.

Gypsum board manufacturing line Decoration and veneer sectionAfter making use of adhesive and pressing, the paper gypsum board is flipped over and then utilized with adhesive and pressed for curing. After that, it is cut, bound, and saved in boxes.Main Performance of Gypsum Board(1) Low manufacturing electricity consumption.

Gypsum board from Gypsum plasterboard production line is a commonly used building material in construction projects, such as suspended ceilings, suspended ceilings, false ceilings, partition walls, etc. It is covered on both sides with cardboard, and the center is made of gypsum material.

Add foaming agent to the storage tank. When in use, the foaming agent and moisture are respectively despatched to the foaming machine via the metering pump, and compressed air is delivered to produce secure foam, which is despatched to the vertical mixer.After the adhesive is organized in the tank, it is fed into the spray ports on each aspects of the forming station, and the adhesive tape is sprayed onto each facets of the paper gypsum board.

With the fast improvement of China's economy, paper gypsum board as a new constructing substances mild board in the important product, in the constructing ornament enterprise has been hastily promoted and applied, the modern-day home demand for grant situation, many companies are additionally actively planning to use home or the introduction of overseas superior technological know-how and tools funding in the building 

Product name: Paper Faced Gypsum BoardProduct performance: The paper confronted gypsum board has robust factors such as mild quality, fireproofing, warmth preservation, sound insulation, humidification absorbing, easiness for set up and construction, and so on.

Gypsum board produce Process flow:Gypsum in the fabric yard - Calcination - Abrasives - Cooling storage - Clinker dimension - Mixing (water, dry cloth additives, moist fabric additives) - Forming (protective paper) - Forming (adhesive edge) - Solidification - Cutting - Drying - Screening - Sawing area - Sealing area - StackingAnnual capacity/M2Day capacity(sheet)1200×2400×9mmDrier layerControl system2Million23004PLC4Million46006PLC6Million69008 DCS1.

Gypsum board from Gypsum plasterboard production line installationBefore starting to install the gypsum board, please ensure that you have prepared the materials you will need and use:Screw• Pins• Washers• Drill• Metal profiles U and CTrimming knitT-shaped rulerAdhesive applicator• A tape measure• A pencilA hammer• Sound insulation tapeStep 1: Control the wallDetermine the location and safety of the composite wall. Mark the fixed line of the U-shaped profile with a pencil.

Add foaming agent to the storage tank. When in use, the foaming agent and moisture are respectively sent to the foaming device by the metering pump, and compressed air is introduced to produce stable foam, which is sent to the vertical mixer.After the adhesive is prepared in the tank, it is fed into the spray ports on both sides of the forming station, and the adhesive tape is sprayed onto both sides of the paper gypsum board.

The face paper is wrapped snugly spherical each and every phase and sealed to the decrease again paper.Cutting the panelsBy the time the edges have been shaped, the plaster core has set sufficiently for a knife to slice the continuous strip into famous panel sizes.

Gypsum board production line Drying sectionThe paper gypsum board is fed into each layer of the 12 layer dryer by a bridge distribution machine according to the program. The dryer is divided into two zones, using hot steam as the heat source. While the hot air paper gypsum board slowly moves forward in the dryer, it continuously exchanges heat with the longitudinally flowing hot air. The board absorbs heat, and the temperature rises. The free water in the board slowly evaporates, but it does not damage the crystalline water of the dihydrate gypsum.

Gypsum board production line Decoration and veneer sectionAfter applying adhesive and pressing, the paper gypsum board is flipped over and then applied with adhesive and pressed for curing. After that, it is cut, bound, and stored in boxes.Main Performance of Gypsum Board(1) Low production energy consumption. The unit production energy consumption of the binder gypsum used for producing paper gypsum board is 78% lower than that of cement.(2) Lightweight insulation, using paper faced gypsum board as a partition, weighing only 1/3 1/4 of a brick wall.

At present, there are nearly twenty large paper gypsum board production lines under construction and proposed in the country, of which six are production lines with an annual output of more than 20 million m2. From the perspective of the manufacturers that have been put into production and the manufacturers that are to be built, most of them are located in the eastern coastal zone, which is directly related to the rich gypsum resources in East China, the developed economy in the east, and the relatively developed gypsum board market.

Gypsum that has been overwhelmed and heated to cast off 75% of its water content material is acknowledged as plaster of Paris. When water is delivered to this first-class white powder, the ensuing cloth is without difficulty molded into any favored shape. Upon drying, the reconstituted gypsum regains its rock-like characteristics whilst preserving the favored shape.

Proportioning and molding section: it more often than not consists of gypsum powder metering scale, auxiliary powder scale, two variable frequency slurry pumps, automated manipulate of conveying knife and slurry mixer, molding station mixer, platform vibration motor and different equipment, which can recognise the proportional addition of gypsum powder, auxiliary powder and slurry, and entire the computerized proportioning of the complete system, which can no longer solely retailer personnel,&nb

1. Classification of gypsum board from Gypsum board plantThe gypsum boards from Gypsum board plantproduced in China by and large include: paper confronted gypsum board, ornamental gypsum board, gypsum hole strip board, fiber ypsum board, gypsum sound-absorbing board, positioning factor gypsum board, etc.(l) Paper confronted gypsum board. Paper gypsum board is a light-weight board made with gypsum slurry as the core and paper as the cowl on each sides.